Mpall_f1_7f00_dl07_v503_0a Exe

Posted on by



Phison群联MPALL v3.20.00量产工具for PS2251-38BN,FW GetInfo.exe HubMapping.ini IDBLKTIMING.dll inpout32.dll MP.ini MPALLF17F00DL07v32000.exe. 2、选择Advance Setting和Load Last Setting这两个选项后点击OK.

  1. Run MPALLF17F00DL07v5030A.exe and plug your drive in and click the update button. You should see one of the numbered slots turn green and display some information about your device. If not, try other USB ports until you find one that works.
  2. File name: MPALLF17F00DL07v5030A.exe Upload Date: 2018-11-09T03:21:39.000Z Size: 3249152. ContentcopyThis file is hosted at free file sharing service 4shared.
  3. Glary Utilities is free system utilities to clean and repair registry, defrag disk, remove junk files, fix PC errors, protect privacy, and provides more solutions to other PC problems.

On this page i am going to explain how to recover your self made USB Rubber Ducky to a regular USB Stick

So now that u made your own USB Rubber Ducky using my guide HERE

you may come to a point where u want to recover the converted stick back to a normal Flash drive

you also need to recover it to a normal flash drive every time you want to flash a new payload on the USB Stick

so now i am going to explain you how to do this

Step One:

Download this file: HERE

For convenience save this file to c:fwfw_bn

This will give u this file as a result at that location

Now right click on the file and select Extract Here

Mpall_f1_7f00_dl07_v503_0a Exe

this will give u this folder

Open the folder MPALLv3.710A_03MLC(UP03 64pin)

Mpall_f1_7f00_dl07_v503_0a

u should then see this

Now double click on MPALL_F1_9000_v371_0A.exe

u should then be in the software tool to recover the USB Stick

like seen below

Mpall_f1_7f00_dl07_v503_0a Exe

Keep shorting this pins while plugging in the USB Stick

u should then come to this window

U now successfully flashed the USB Stick back to stock!

If you landed on this page it means you’re looking after how to get rid of the write protection that all of the autodesk usb sticks ship with.
This article covers, specifically, the 32GB stick from 2015 (or maybe 2014).


I spent over 3 hours in order to get this solved and I got it worst: after using the formatter SilliconPower.exe tool, my stick got messed up, rendering it useless to the point that even though it was detected upon plugging it in, it always gave me the message ‘drive has no media’ whenever I tried to repair, format, wipe or even create/delete partitions.

Anyway, if this is what you are after, download this. It contains MPALL v3.63.0C-DL17 which was the only version that properly detected this USB Stick (I tried, 5 or 6 different versions till I got to this one). I managed to get a hold of this version while searching through and landed on this page: http://repusb.cubava.cu/?page_id=140&cpage=4

I’m sure you’ll find MPALL versions that suit your usb stick in case yours is a different version than the one I got.

Regarding this stick, this is the most important information you must know:

Chip model / IC Version: PS2251-03
Burner: BN03V104.BIN
Firmware: FW03FF01V10010M.BIN

Download MPALL v3.63.0C-DL17-stevesmind
Within this file you have everything including:
Burner file
Firmware file
MP.ini configured for the Autodesk 32GB usb stick
MPALL 3.63.0C-DL17 out of the box (I decided to include this as while using MPALL 3.29 I noticed the application stopped working so including it just in case)

Mpall_f1_7f00_dl07_v503_0a.exe Download

Mpall_f1_7f00_dl07_v503_0a Exe

Mpall_f1_7f00_dl07_v503_0a.exe

I hope this is helpful to someone out there. If it is, leave a comment. Would love to know this was valuable to someone.